Difference between revisions of "ITSV-1 - Software Upgrade"
From Zenitel Wiki
(→Procedure) |
(→Procedure) |
||
| Line 4: | Line 4: | ||
# [[Downloads#ITSV-1_station|Download]] the software package '''gxv3240fw_1.0.3.179.bin''' to your PC. | # [[Downloads#ITSV-1_station|Download]] the software package '''gxv3240fw_1.0.3.179.bin''' to your PC. | ||
# Log on to the ITSV-1 Station web interface. Default login credentials are '''admin''' and '''alphaadmin''' | # Log on to the ITSV-1 Station web interface. Default login credentials are '''admin''' and '''alphaadmin''' | ||
| − | # Select '''Maintenance''' > '''Upgrade''', and choose '''Manual | + | # Select '''Maintenance''' > '''Upgrade''', and choose "Firmware Upgrade Via:" '''Manual Upload''' from the dropdown list. |
# Enter the image file: '''sti-4.2.3.14''', and click '''Save settings''' | # Enter the image file: '''sti-4.2.3.14''', and click '''Save settings''' | ||
Revision as of 12:22, 17 August 2017
This article describes how to upgrade the software of the ITSV-1 station via the web interface of the station.
Contents
Procedure
- Download the software package gxv3240fw_1.0.3.179.bin to your PC.
- Log on to the ITSV-1 Station web interface. Default login credentials are admin and alphaadmin
- Select Maintenance > Upgrade, and choose "Firmware Upgrade Via:" Manual Upload from the dropdown list.
- Enter the image file: sti-4.2.3.14, and click Save settings
The station will now contact the TFTP server and download the files. The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the Log viewer tab in the TFTP server program.
Upgrade TCIS or TKIS-2 (Turbine Compact) from version 3.0.x.x
Upgrade using the Web Interface of the station
Prerequisites
- A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html.
- Download the software package tsi-3.0.3.5.zip, and unzip the package and store the files in a folder on your PC.
- Download the software package sti-prod-4.2.3.14.zip, and unzip the package and store the files in a different folder on your PC.
- Check if your local firewall is not blocking incoming ping/ICMP (Turbine station is pinging TFTP Server during update process)
Upgrade procedure
The upgrade is a two-step process:
- First install version 3.0.3.5, then
- Install version 4.2.3.14
1. Start the TFTP server program and click Browse, and select the folder where the version 3.0.3.5 software files are located
2. Log on to the Turbine Station web interface. Default login credentials are admin and alphaadmin. Select Station Administration > Manual Upgrade
3. Enter the IP address of the TFTP server (I.e. the IP address of your PC)
4. Enter the image file: tsi-3.0.3.5, and click Save settings
The station will now contact the TFTP server and download the files. The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the Log viewer tab in the TFTP server program.
When the station is up and running again, the next step is to install version 4.2.3.14:
5. In the TFTP server program, Browse to the folder where the version 4.2.3.14 software files are located
6. In the Turbine web interface enter the image file: tsi2sti-4.2.3.14.ipk, and Save settings
The station will again contact the TFTP server and download and install the required files.
Upgrade from version 3.1, 4.0, 4.1
For upgrade from version 3.1, 4.0, 4.1 see article: Upgrade Turbine stations from 3.1, 4.0 or 4.1
Troubleshooting
In the case the upgrade is not successful it may be due to a windows setting.
- For Windows XP: http://www.sysprobs.com/enable-ping-in-xp
- For Windows7: http://www.sysprobs.com/enable-ping-reply-windows-7