Difference between revisions of "TKIS Restore Factory Defaults"
From Zenitel Wiki
Line 3: | Line 3: | ||
__NOTOC__ | __NOTOC__ | ||
− | ==Preparation== | + | == Preparation == |
# Connect a loudspeaker (8 ohms or higher) to the speaker output | # Connect a loudspeaker (8 ohms or higher) to the speaker output | ||
# Connect a push button to input 1 | # Connect a push button to input 1 | ||
Line 9: | Line 9: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
− | ==Reset to Factory Default Settings with Activated DHCP== | + | == Reset to Factory Default Settings with Activated DHCP == |
To reset: | To reset: | ||
# While pressing the button, power up the station by connecting to a PoE switch | # While pressing the button, power up the station by connecting to a PoE switch | ||
Line 22: | Line 22: | ||
:Password: '''alphaadmin''' | :Password: '''alphaadmin''' | ||
− | ==Reset to Factory Default Settings with Static IP== | + | == Reset to Factory Default Settings with Static IP == |
To reset: | To reset: | ||
# While pressing the button, power up the station by connecting to a PoE switch | # While pressing the button, power up the station by connecting to a PoE switch |
Revision as of 14:36, 15 May 2018
A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP.
Preparation
- Connect a loudspeaker (8 ohms or higher) to the speaker output
- Connect a push button to input 1
Reset to Factory Default Settings with Activated DHCP
To reset:
- While pressing the button, power up the station by connecting to a PoE switch
- Hold the button until the station audio starts counting, and release the button on count 1
- Press and hold the button on count 5 and release on count 0
- If there is no 0 count, the procedure has failed and you have to start again
- Press the button, and the station will speak its IP address
Factory default values
- Station IP address: (determined by DHCP server)
- Username: admin
- Password: alphaadmin
Reset to Factory Default Settings with Static IP
To reset:
- While pressing the button, power up the station by connecting to a PoE switch
- Hold the button until the station audio starts counting, and release the button on count 1
- Press and hold the button on count 3 and release on count 0
- If there is no 0 count, the procedure has failed and you have to start again
- Press the button, and the station will speak its IP address
Factory default values
- Station IP address: 169.254.1.100
- Username: admin
- Password: alphaadmin