Difference between revisions of "Substations calling external telephone(s)"
From Zenitel Wiki
(→Configure the Call Button of the substation) |
(→Configure the Call Button of the substation) |
||
Line 5: | Line 5: | ||
==Configure the Call Button of the substation== | ==Configure the Call Button of the substation== | ||
− | The call button can be configured in two diffeerent ways to dial a preconfigured number. | + | The call button can be configured in two diffeerent ways to dial a preconfigured phone number. |
Let's assume that the prefix to the external phone is "0", and the phone number to call is 987654321. | Let's assume that the prefix to the external phone is "0", and the phone number to call is 987654321. |
Revision as of 14:55, 24 August 2018
This article describes how substations in the AlphaCom can be configured to call external telephone number(s).
- If all lines in the SIP gateway are busy, the call will be placed on hold. When the line becaomes free, the call will automatically be dialed
- Multiple phone numbers can be defined. If the first phone doesn't answer within a preset time, the call can be routed to a second (and a third...) phone number.
Configure the Call Button of the substation
The call button can be configured in two diffeerent ways to dial a preconfigured phone number.
Let's assume that the prefix to the external phone is "0", and the phone number to call is 987654321.
Alternative 1:
Alternative 2: