Difference between revisions of "Substations calling external telephone(s)"
From Zenitel Wiki
(→Configure the Call Button of the substation) |
|||
Line 14: | Line 14: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
− | Start the string with a "T", | + | Start the string with a "T", followed by the prefix number "0". Then "w" or "W", followed by the phone number. "w" introduces a 0.5 second pause, while "W" introduces a 1.0 second pause. See [[Play DAK Feature]] for further details. |
Alternative 2: | Alternative 2: | ||
[[File:DAK CallPhone2.PNG|thumb|left|500px|Direct Access Key Settings]] | [[File:DAK CallPhone2.PNG|thumb|left|500px|Direct Access Key Settings]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> |
Revision as of 15:04, 24 August 2018
This article describes how substations in the AlphaCom can be configured to call external telephone number(s).
- If all lines in the SIP gateway are busy, the call will be queued. When the line becomes free, the call will automatically progress.
- Multiple phone numbers can be defined. If the first phone doesn't answer within a preset time, the call can be routed to a second (and a third...) phone number.
Configure the Call Button of the substation
The call button can be configured in two different ways to dial a preconfigured phone number.
Let's assume that the prefix to the external phone line is "0", and the phone number to call is 987654321.
Alternative 1:
Start the string with a "T", followed by the prefix number "0". Then "w" or "W", followed by the phone number. "w" introduces a 0.5 second pause, while "W" introduces a 1.0 second pause. See Play DAK Feature for further details.
Alternative 2: