Difference between revisions of "ENA2100 Status LEDs"
From Zenitel Wiki
| Line 9: | Line 9: | ||
* '''Fault''': The Yellow fault LED will be lit whenever the amplifier detects an error. Which errors to report is configurable. See [[ENA Amplifier - Monitoring]]. The Fault LED is lit during the startup sequence | * '''Fault''': The Yellow fault LED will be lit whenever the amplifier detects an error. Which errors to report is configurable. See [[ENA Amplifier - Monitoring]]. The Fault LED is lit during the startup sequence | ||
* '''Disabled''': This Yellow LED will be lit if the loudspeaker output channels are disabled (From Web: '''Amplifier Settings''' > '''Line Control''' > '''Lines Enabled''': Uncheck) | * '''Disabled''': This Yellow LED will be lit if the loudspeaker output channels are disabled (From Web: '''Amplifier Settings''' > '''Line Control''' > '''Lines Enabled''': Uncheck) | ||
| − | * '''VU 1''': | + | * '''VU 1''': This Green and Red LED is lit when there is audio activity on loudspeaker channel 1 |
| − | * '''VU 2''': | + | * '''VU 2''': This Green and Red LED is lit when there is audio activity on loudspeaker channel 2 |
Revision as of 13:50, 9 January 2019
The ENA2100-AC Amplifier has status LED indicators in the front panel:
- Power: Steady green light when the amplifier is powered on
- Status: When the amplifier is operational, the LED is flashing green. The LED will be steady lit during the startup sequence
- Fault: The Yellow fault LED will be lit whenever the amplifier detects an error. Which errors to report is configurable. See ENA Amplifier - Monitoring. The Fault LED is lit during the startup sequence
- Disabled: This Yellow LED will be lit if the loudspeaker output channels are disabled (From Web: Amplifier Settings > Line Control > Lines Enabled: Uncheck)
- VU 1: This Green and Red LED is lit when there is audio activity on loudspeaker channel 1
- VU 2: This Green and Red LED is lit when there is audio activity on loudspeaker channel 2