Actions

Difference between revisions of "Event 01: Audio"

From Zenitel Wiki

(Redirecting to Audio (Event Type))
 
Line 1: Line 1:
<div style="float:right; border:thin solid green;">[[Event Handler| Back to Event Handler Page ]]</div>
+
#REDIRECT [[Audio (Event Type)]]
'''Audio : type 01'''
 
 
 
The audio events are intended for PA control or mobile radio keying, that is, as an extension to the audio function of the 'owner' station. Normally the action for this event is the operation of an RCO. The Audio event is divided into a number of sub-events, which are closely related to each other, and which can be combined to operate the same RCO.
 
User Defined Properties (UDP's) cannot be used with Audio events.
 
Audio events are not associated with a 'related to' number.
 
In AlphaPro the sub-events can be selected after clicking the 'Details'-button.
 
 
 
'''''Always: Both incoming and outgoing calls:'''''
 
 
 
* Simplex listen (release own M-key, or conversation partner presses the M-key)
 
* Tones
 
* Sending Gong (this station makes a group call)
 
* Voice message
 
<br>The station state must be: Handset ON or Volume / Handset override.
 
<br>Application:
 
* Non-selective mobile radio, PA
 
 
 
'''''Incoming call:'''''
 
 
 
* Incoming Simplex listen (release own M-key, or conversation partner presses the M-key)
 
* Tones
 
<br>The station state must be:
 
* Incoming call
 
* Handset ON or Volume/Handset Override
 
<br>Note: The event is reported OFF (and stays OFF) if the user touches any key or the handset.
 
This is called 'take down', as it is intended to transfer an incoming call from an external
 
RCO-controlled speaker to the station’s internal speaker when the user touches any key or the handset.
 
 
 
'''''Private ringing: Incoming call only:'''''
 
 
 
* Ringing tone (on/off for each tone period)
 
<br>The station state must be:
 
* Incoming call
 
* Handset ON or Volume/Handset Override
 
<br>Application:
 
* Lamp for incoming call, flashing with the tone bursts
 
 
 
'''''Voice paging:'''''
 
 
 
* Receiving Gong
 
* Voice Paging
 
<br>The station state must be:
 
* Handset ON or Volume/Handset Override
 
 
 
'''''Audio program:'''''
 
 
 
The station state must be:
 
* Handset ON or Volume/Handset Override
 
 
 
'''''Program conference:'''''
 
 
 
* Program conference, when another station feeds it with audio (M-key pressed)
 
<br>The station state must be:
 
* Handset ON or Volume/Handset Override
 

Latest revision as of 23:31, 6 April 2008

Redirect to: