Difference between revisions of "TFIE Indication LEDs"
From Zenitel Wiki
(→LEDs in Function Keys/DAK keys) |
(→LEDs in Function Keys/DAK keys) |
||
| Line 11: | Line 11: | ||
== LEDs in Function Keys/DAK keys == | == LEDs in Function Keys/DAK keys == | ||
When a TFIE station is used in AlphaCom mode, the LEDs in the DAK keys can be controlled from the [[Event Handler]] by using the [[IND|IND command]]. | When a TFIE station is used in AlphaCom mode, the LEDs in the DAK keys can be controlled from the [[Event Handler]] by using the [[IND|IND command]]. | ||
| + | |||
| + | <br> | ||
==Status LEDs on PCB== | ==Status LEDs on PCB== | ||
Revision as of 08:37, 12 April 2019
Contents
LEDs on Front Plate
- Power LED (Green): Steady light when power is OK
- Fault LED (Yellow): Flashing when the station is not registered/no connection to server
- Call LED (Red): Steady light during a conversation/call
LEDs in Function Keys/DAK keys
When a TFIE station is used in AlphaCom mode, the LEDs in the DAK keys can be controlled from the Event Handler by using the IND command.
Status LEDs on PCB
- Flashing 2 red + 1 green: Station has no connection to the AlphaCom server/exchange.
- Flashing 1 red + 2 green: Station connected but NOT registered in the AlphaCom server/exchange.
- Flashing 3 green Station connected and registered in the AlphaCom server/exchange.
Ethernet Activity & Speed LEDs on PCB
Green LED:
- Steady light: Ethernet connection OK
- Flashing: Ethernet data traffic
- No light: No Ethernet connection
Yellow LED:
- Steady light: 100 Mbit Ethernet connection
- No light: 10 Mbit Ethernet connection