Difference between revisions of "TCIS Restore Factory Defaults"
From Zenitel Wiki
(→Factory default values) |
(→Factory default values) (Tag: Visual edit) |
||
| Line 7: | Line 7: | ||
__NOTOC__ | __NOTOC__ | ||
'''To reset:''' | '''To reset:''' | ||
| + | |||
:1. While '''pressing any button''', power up the station by connecting it to a PoE switch. | :1. While '''pressing any button''', power up the station by connecting it to a PoE switch. | ||
:2. Hold the button until the station audio starts counting, and release the button on '''count 1'''. | :2. Hold the button until the station audio starts counting, and release the button on '''count 1'''. | ||
| Line 16: | Line 17: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | === Factory default values === | + | ===Factory default values=== |
| − | * Station IP address: Determined by DHCP server. If no DHCP server is available, it gets a random 169.254.x.x address. | + | |
| − | * Username: '''admin''' | + | *Station IP address: Determined by DHCP server. If no DHCP server is available, it gets a random 169.254.x.x address. |
| − | * Password: '''alphaadmin''' | + | *Username: '''admin''' |
| − | * Mode of operation: '''Pulse''' | + | *Password: '''alphaadmin''' |
| + | *Mode of operation: '''Pulse''' | ||
==Reset to Factory Default Settings with Static IP== | ==Reset to Factory Default Settings with Static IP== | ||
| Line 27: | Line 29: | ||
'''To reset:''' | '''To reset:''' | ||
| + | |||
:1. While '''pressing any button''', power up the station by connecting to a PoE switch. | :1. While '''pressing any button''', power up the station by connecting to a PoE switch. | ||
:2. Hold the button until the station audio starts counting, and release the button on '''count 1'''. | :2. Hold the button until the station audio starts counting, and release the button on '''count 1'''. | ||
| Line 36: | Line 39: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | === Factory default values === | + | ===Factory default values=== |
| − | |||
| − | |||
| − | |||
| − | |||
| + | *Station IP address: '''169.254.1.100''' | ||
| + | *Username: '''admin''' | ||
| + | *Password: '''alphaadmin''' | ||
| + | *Mode of operation: '''Edge''' | ||
[[Category: Turbine - Restore Factory Defaults and Software Upgrade]] | [[Category: Turbine - Restore Factory Defaults and Software Upgrade]] | ||
Revision as of 16:29, 26 March 2020
A Turbine IP Station may have to be reset to its original factory default settings if, for instance, the password to the station web interface is forgotten. The defaults can either be set to Activated DHCP or Static IP.
Reset to Factory Default Settings with Activated DHCP
To reset:
- 1. While pressing any button, power up the station by connecting it to a PoE switch.
- 2. Hold the button until the station audio starts counting, and release the button on count 1.
- 3. Press and hold the button on count 5 and release on count 0.
- - if there is no 0 count, the procedure has failed and you have to start again
- 4. Press the call button, and the station will speak its IP address
Factory default values
- Station IP address: Determined by DHCP server. If no DHCP server is available, it gets a random 169.254.x.x address.
- Username: admin
- Password: alphaadmin
- Mode of operation: Pulse
Reset to Factory Default Settings with Static IP
To reset:
- 1. While pressing any button, power up the station by connecting to a PoE switch.
- 2. Hold the button until the station audio starts counting, and release the button on count 1.
- 3. Press and hold the button on count 3 and release on count 0.
- - if there is no 0 count, the procedure has failed and you have to start again
- 4. Press the call button, and the station will speak its IP address.
Factory default values
- Station IP address: 169.254.1.100
- Username: admin
- Password: alphaadmin
- Mode of operation: Edge