CALL SETUP

CALL_SETUP		0x0008	8	AMC 08.20
$CALL L101 L102 $CALL L101 L102 W32 $CALL L101 L102 W64 $CALL L101 L102 W0 0 1			Let 101 call 102 Let 101 call, ignore if 102 forwards Let 101 call 102, force both 101 and 102 Let 101 call 102, force private ringing
$CALL_SETUP sets up a conversation like dialing from a station. Default behavior: A station is disconnected if busy Call can result in Private ringing, Absent, Busy or Transfer like a ordinary call The A station's call priority in NVRAM is used. No acknowledge messages are returned $CONN_REQUEST/$CONN is retained for compatibility only, CALL_SETUP is the preferred message now.
1	NET_OBJ_REF<br\>{ECL_STATION, <BR\> ECL_USER}	A - user or station.
2	NET_OBJ_REF <br\>{ECL_STATION, <BR\> ECL_USER}	B - user or station
3	UINT2<br\>(optional)	Call mode options (default zero)<br\>Call mode options can be the sum of the following:<BR\> 1: Return CONN_REFERENCE, STATION_DOWN or STATION_BUSY. Send DISCONNECTED at disconnect (CSF_RETURN_ACK)<BR\> 2: Require CONN_REF_ACK and DISCONNECTED_ACK (CSF_3WAY_ACK)<BR\> 4: Reserved<BR\> 8: Reserved<BR\> 16: Do not disconnect A station if busy (CSF_NOT_FORCE_A)<BR\> 32: Do not follow call forwarding (CSF_NO_FORWARD)<BR\> 64: Used internally for transfer call, answer group call (CSF_TRANSFER_CALL) Forces both A and B stations.<BR\> 128: Force call in Open Duplex mode (CSF_OPEN_DUPLEX) (AMC 09.03)
4	UINT1<BR\>(optional)	Allocation priority of A station. Zero or omitted means that the NVRAM priority of A station is used,Users & Stations (AlphaPro). Priority 4 gives Busy override of A station. Priority 1,2,3 gives normal allocation.
5	UINT1<br\>(optional)	Call priority towards B station. Value 1 - 4. Value zero or omitted means that the NVRAM priority of A station is used, Users & Stations (AlphaPro).
6	NET_OBJ_REF<br\>{ECL_STATION}<br\>(optional)	B Station if User B is not at own station.
Response		CONN_REFERENCE, STATION_DOWN or STATION_BUSY, or none

Back to AlphaNet message list