Difference between revisions of "INCA Masterstation PCB LED Indicators"
From Zenitel Wiki
(→Status LED) |
|||
| Line 32: | Line 32: | ||
* No light: 10 Mbit Ethernet connection | * No light: 10 Mbit Ethernet connection | ||
| − | [[Category: | + | [[Category:Station Indication LEDs]] |
Revision as of 12:05, 17 November 2020
Status LED
LED3 – Bicolor SMD LED on board component side.
- Blinking 2 red + 1 green:: Station has no connection to the AlphaCom XE Audio Server.
- Blinking 1 red + 2 green:: Station connected but NOT registered in the AlphaCom XE Audio Server.
- Blinking 3 green:: Station connected and registered in the AlphaCom XE Audio Server.
Power LED
LED6 – Yellow SMD LED on board component side.
- Light: 13VDC board power OK.
- No light: 13VDC board power faulty if no other LEDs are lit.
Possible reasons:
- 24 VDC or PoE not connected
- Faulty board
LAN LEDs
Left LED:
- Steady light: Ethernet connection OK
- Blinking: Ethernet traffic
- No light: No Ethernet connection
Right LED:
- Light: 100 Mbit Ethernet connection
- No light: 10 Mbit Ethernet connection