Starting Up Turbine TFIX-V2 Station

Connecting the PC and the TFIX-V2 station to a network switch

The Turbine EX Station (TFIX-V2) features an embedded web interface, which allows users to log in via a standard web browser.

To access the station from your PC, the PC and the TFIX-V2 station have to be connected to a network switch:

1. Connect the PC to the switch
2. Connect the Flowire FCDC-3 to the switch
3. Connect the TFIX-V2 station to the FCDC-3 using two wires
4. Connect 24-48VDC (48VDC recommended) to the Flowire FCDC-3
5. The station will now start up
6. After startup, an IP address is automatically obtained in one of two ways:
   1. An IP address is obtained from a DHCP server if there is one.
   2. If there is no DHCP server, a random IP address in the range 169.254.x.x will be assigned.

How to find the IP Address of the station

If the station is not registered to a server, it will speak its own IP address when you press the Call button, a Digit key or a DAK key on the station

At startup the station is by default set to operate in IC-Edge mode.

During commissioning, the station must be set to operate in the required mode. There are three modes of operation:

• ICX-AlphaCom mode - the station will register to an ICX-AlphaCom server
• SIP mode - the station will register to a SIP server
• IC-Edge mode - the station will register to a IC-Edge server