Logging (VS-Operator)

This article shows how to configure the logging feature in the VS-Operator.

In the VSOP Client, select Filter sets, and Add a filter set for Station, and in the Caption field assign a descriptive name to the filter set, e.g. "Journal".

Information can be logged into the onscreen journal (Show) and to disk (Log).

Configuring Filter Set "Journal" for logging. Here "Call Received from <number> <name>" is logged when a call request is received

The text to send to the log is defined in the field Message text.

Here are some examples that can be used

Event	Text in "Message text" field	Information Level	Comment
On CallRequest Add	Call received from %DIRA %ACAPTION	Info	Triggered when a Ringing Group call (or Call Request) is received
On CallRequest Remove	Call from %DIRA %ACAPTION removed from queue	Info	Triggered when a call is removed from the call queue
OnConnect	Conversation with %DIRA %ACAPTION	Info	Triggered when a conversation is established
OnDisconnect	Conversation with %DIRA %ACAPTION ended	Info	Triggered when a conversation is terminated
OnError	Device error at %DIRA %ACAPTION	Alarm	Triggered when a station or device is reported faulty
On Custom params	<depends on the event>	<depends on the event>	Triggers on....
On Custom word string	<depends on the event>	<depends on the event>	Triggers on....

Output to the log when using the examples above

It is possible to add parameters into this text field.

In the case of OnConnect a Message text could be:

• Call %DIROP %DIRB
  • %DIROP will be replaced with the directory number of the station assosiated to the V-S Operator

App.STE("$SLRC W%RCO U1 W30");

Configuring Filter Set for logging

Now change the mode of operation to Operational, and verify that the Journal displays the correct information: