Difference between revisions of "Permanent Audio Stream"
From Zenitel Wiki
| Line 2: | Line 2: | ||
'''Permanent Audio Stream''' (PAS) is a feature in Zenitel Devices enabling transmission of RTP audio streams outside a call. Devices can be configured to permanently transmit up to two RTP streams (configurable). The RTP audio will be sent to a given IP address/port with configured codec. | '''Permanent Audio Stream''' (PAS) is a feature in Zenitel Devices enabling transmission of RTP audio streams outside a call. Devices can be configured to permanently transmit up to two RTP streams (configurable). The RTP audio will be sent to a given IP address/port with configured codec. | ||
| − | The configuration page for PAS is not available from the web interface of the device. To | + | The configuration page for PAS is not available from the web interface of the device. To access the PAS Settings use the following url: <ipaddress>/goform/'''zForm_stream_config''' |
It is possible to change the condition for enabling RTP to only be during calls. | It is possible to change the condition for enabling RTP to only be during calls. | ||
Revision as of 12:48, 27 September 2024
Permanent Audio Stream (PAS) is a feature in Zenitel Devices enabling transmission of RTP audio streams outside a call. Devices can be configured to permanently transmit up to two RTP streams (configurable). The RTP audio will be sent to a given IP address/port with configured codec.
The configuration page for PAS is not available from the web interface of the device. To access the PAS Settings use the following url: <ipaddress>/goform/zForm_stream_config
It is possible to change the condition for enabling RTP to only be during calls.
It is also possible to make only calls created using specified DAKs enable the stream in SIP mode.
Tools like VS-Recorder 2.0 can be used to record the actual RTP audio.
|
In Turbine Video stations the Permanent audio stream is removed on TCIV from sw 4.11, but available on TCIV+ |