Difference between revisions of "Permanent Audio Stream"
From Zenitel Wiki
| Line 9: | Line 9: | ||
[[File:PAS2.PNG|thumb|500px|left|Permanent Audio configuration page]] | [[File:PAS2.PNG|thumb|500px|left|Permanent Audio configuration page]] | ||
| − | + | <br style="clear:both;" /> | |
| Line 20: | Line 20: | ||
---- | ---- | ||
[[File:PermanentAudio.png|thumb|500px|left|Permanent Audio configuration page]] | [[File:PermanentAudio.png|thumb|500px|left|Permanent Audio configuration page]] | ||
| − | <br style="clear:both;" />Tools like VS-Recorder 2.0 can be used to record the actual RTP audio. | + | <br style="clear:both;" /> |
| + | |||
| + | Tools like VS-Recorder 2.0 can be used to record the actual RTP audio. | ||
{{Note|In Turbine Video stations the Permanent audio stream is removed on TCIV from sw 4.11, but available on TCIV+}} | {{Note|In Turbine Video stations the Permanent audio stream is removed on TCIV from sw 4.11, but available on TCIV+}} | ||
Revision as of 13:10, 27 September 2024
Permanent Audio Stream (PAS) is a feature in Zenitel Devices enabling transmission of RTP audio streams outside a call. Devices can be configured to permanently transmit up to two RTP streams (configurable). The RTP audio will be sent to a given IP address/port with configured codec.
The configuration page for PAS is not available from the web interface of the device. To access the PAS Settings use the following url: <ipaddress>/goform/zForm_stream_config
Optional settings:
- Configure the PAS to transmit RTP audio only during a call.
- Configure the PAS to transmit RTP audio only when the call is initiated from a specific DAK key.
The PAS web page in firmware 8 and earlier
Tools like VS-Recorder 2.0 can be used to record the actual RTP audio.
|
In Turbine Video stations the Permanent audio stream is removed on TCIV from sw 4.11, but available on TCIV+ |