Zenitel IP Speaker connectors: Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| Line 11: | Line 11: | ||
| align="center" style="background:#ffd400;" |'''''Comment''''' | | align="center" style="background:#ffd400;" |'''''Comment''''' | ||
|- | |- | ||
| | | 1 || GPIO || General Purpose In Out | ||
|- | |- | ||
| | | 2 || 5V+ || 5 volt output | ||
|- | |- | ||
| | | 3 || Ext speaker (8ohm) || Connection for external 8 ohm loudspeaker | ||
|- | |- | ||
| | | 4 || Ext speaker (8ohm) || Connection for external 8 ohm loudspeaker | ||
|- | |- | ||
| | | 5 || Int speaker (8ohm) || Connection for internal 8 ohm loudspeaker | ||
|- | |- | ||
| | | 6 || Int speaker (8ohm) || Connection for internal 8 ohm loudspeaker | ||
|- | |- | ||
| 7 || Relay CO || Relay output, Common | | 7 || Relay CO || Relay output, Common | ||
| Line 35: | Line 35: | ||
{{Note| | {{Note| | ||
Connectable conductors: 0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm². | |||
}} | }} | ||
Latest revision as of 14:24, 13 January 2025
| Pin | Description | Comment |
| 1 | GPIO | General Purpose In Out |
| 2 | 5V+ | 5 volt output |
| 3 | Ext speaker (8ohm) | Connection for external 8 ohm loudspeaker |
| 4 | Ext speaker (8ohm) | Connection for external 8 ohm loudspeaker |
| 5 | Int speaker (8ohm) | Connection for internal 8 ohm loudspeaker |
| 6 | Int speaker (8ohm) | Connection for internal 8 ohm loudspeaker |
| 7 | Relay CO | Relay output, Common |
| 8 | Relay NO | Relay output, Normal Open |
| 9 | Line in/Mic | Audio input (positive) |
| 10 | Line in/Mic | Audio input (negative) |
| 11 | GND | Ground connector |
|
Connectable conductors: 0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm². |
|
|
|