Factory Reset Audio Settings: Difference between revisions
From Zenitel Wiki
| Line 19: | Line 19: | ||
** Audio volume experienced as too loud | ** Audio volume experienced as too loud | ||
** Audio level too high causing clipping and distortion | ** Audio level too high causing clipping and distortion | ||
** You hear artifacts and metallic or "robotic" audio | |||
** You hear echo; In rare occasion you may get issue with echo due to increased volume in echo path | ** You hear echo; In rare occasion you may get issue with echo due to increased volume in echo path | ||
** Line In and Line Out signals levels on the TKIE or TKIS kit. After upgrading to ver. 7 or higher both the Line In and the Line Out signals will have a different gain than before. | ** Line In and Line Out signals levels on the TKIE or TKIS kit. After upgrading to ver. 7 or higher both the Line In and the Line Out signals will have a different gain than before. | ||
[[Category: Audio Settings and Audio Features]] | [[Category: Audio Settings and Audio Features]] | ||
Latest revision as of 14:41, 30 January 2026
All parameters and values in the Audio Settings page can be reset to default by selecting Factory Reset Audio Settings from the Audio Settings menu.
First enable Advanced Configuration mode. Then navigate to Audio Settings:
 |
| Factory Reset Audio Settings |
When do I need to reset the audio settings?
- You have been playing with the audio settings, and want to return to the factory audio settings only, without having to factory default the complete device.
- You are experiencing unexpected "weird" audio issues in general
- You are experiencing audio issues after firmware upgrade (especially after upgrade from version 6 or older to version 7 or newer). Issues with:
- Audio volume experienced as too loud
- Audio level too high causing clipping and distortion
- You hear artifacts and metallic or "robotic" audio
- You hear echo; In rare occasion you may get issue with echo due to increased volume in echo path
- Line In and Line Out signals levels on the TKIE or TKIS kit. After upgrading to ver. 7 or higher both the Line In and the Line Out signals will have a different gain than before.