Press and Hold Time (Zenitel Connect Pro): Difference between revisions
From Zenitel Wiki
No edit summary |
|||
| Line 1: | Line 1: | ||
The '''Press and Hold Time''' defines the number of seconds a Call Button (DAK key/Input) must be pressed and held before the call is established. | |||
The minimum delay is 0 seconds (default), and the maximum delay is 60 seconds. | The minimum delay is 0 seconds (default), and the maximum delay is 60 seconds. | ||
Press and Hold Time is used to support the following use cases: | Press and Hold Time is used to support the following use cases: | ||
Revision as of 14:55, 13 February 2026
The Press and Hold Time defines the number of seconds a Call Button (DAK key/Input) must be pressed and held before the call is established.
The minimum delay is 0 seconds (default), and the maximum delay is 60 seconds.
Press and Hold Time is used to support the following use cases:
Lift call
Configuration
Navigate to Devices and Connections > Configuration. Select the Device and click 
Under "Call Priority" adjust the slider to the wanted priority level.
 |
| Press an Hold timer |