Press and Hold Time (Zenitel Connect Pro): Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
The minimum delay is 0 seconds (default), and the maximum delay is 60 seconds. | The minimum delay is 0 seconds (default), and the maximum delay is 60 seconds. | ||
Press and Hold Time is used to support the following use cases: | Press and Hold Time is used to support the following use cases: Lift call | ||
Lift call | |||
== Configuration == | == Configuration == | ||
Revision as of 14:56, 13 February 2026
The Press and Hold Time defines the number of seconds a Call Button (DAK key/Input) must be pressed and held before the call is established.
The minimum delay is 0 seconds (default), and the maximum delay is 60 seconds.
Press and Hold Time is used to support the following use cases: Lift call
Configuration
Navigate to Devices and Connections > Configuration. Select the Device and click 
Under "Call Priority" adjust the slider to the wanted priority level.
 |
| Press an Hold timer |