Difference between revisions of "PUT STRING"
From Zenitel Wiki
Line 39: | Line 39: | ||
[[Category: ACDP messages]] | [[Category: ACDP messages]] | ||
[[AlphaNet_Data_Protocol#General_Exchange_Control|Back to AlphaNet message list]] | [[AlphaNet_Data_Protocol#General_Exchange_Control|Back to AlphaNet message list]] | ||
+ | [[Category:Logging]] |
Revision as of 12:51, 15 March 2012
PUT_STRING | 0x0073 | 115 | AMC 07.30 | |
---|---|---|---|---|
$PUT 1 "Log port message"<br\> $PUT 2 "MPC port message”<br\>$PUT 3 "EDO port message" | <br\> alternative: $MPC 2 "0201 F123 "<br\> | |||
Output String to Exchange serial port after adding appropriate framing depending on selected port.
The source address in the netlayer header is used for logging instead of using a separate parameter. | ||||
1 | UINT1 | Logical Port number:<br\>
0 = NULL Port.<br\>
1 = System Log Port: Before payload: Date, time and node/device is added. After payload: <CR><LF> is added <br\>
2 = TouchLine Data: Before payload: <NULL> is added. After payload: <CR><LF> is added <br\>
3 = External Data Out 1 (EDO 1)<br\>
4 = External Data Out 2 (EDO 2)<br\>
5 = External Data Out 3 (EDO 3)<br\>
6 = External Data Out 4 (EDO 4)<br\>
8 = Debug console output (TST)<br\>No formatting of output at receiving end needed.<br\>
9 = Debug console input (TST)
| ||
2 | UINT1(o...n) | “Payload” Bytes to be output to Port. Delimited by end of message. <br\>Typically plain, readable text, but all character values (0...255) can be used. |