AUDIO M PATH SETUP: Difference between revisions
From Zenitel Wiki
m (Text replacement - "<br\>" to "<br />") |
No edit summary |
||
| Line 1: | Line 1: | ||
{{A}} | |||
{| border="1" | {| border="1" | ||
|- | |- | ||
Revision as of 15:16, 16 January 2017
| AUDIO_M_PATH_SETUP | 0x8016 | 32790 | AMC 07.00 | |
|---|---|---|---|---|
| AlphaNet: Communication in a multi-node network. Set up a audio distribution path from a source node to multiple destination nodes. Typically used for Global Group call.
| ||||
| 1 | UINT1 | Channel number. 0 = request for channel. | ||
| 2 | UINT1 | Priority 0x00 ... 0x0F | ||
| 3 | UINT1 | Starting node of audio path. | ||
| 4 | VBITMAP[..N] | Destination nodes for audio path. | ||
| 5 | UINT1 | Parent local reference for next node | ||
| 6 | UINT1 | Type of audio connection: 1 = audio distribution. 2 = Switchable source for connection ? 3 = IP audio distribution. (field 7,8,9 added) | ||
| 7 | UINT4 | Prev node Audio RTP IP address for next node (AMC 10.00) | ||
| 8 | UINT2 | Prev node Audio RTP port number for next node (AMC 10.00) | ||
| 9 | UINT1 | Audio Codec In use 1 = G711 u-law 2 = G711 A-law 3 = G722 | ||
| 10 | PAYLOAD | End-to-end message. See below | ||
| PAYLOAD MESSAGE attached to AUDIO_M_PATH_SETUP and related messages | ||||
| 1 | UINT1 | Protocol version: 0 = AlphaCom basic functions | ||
| 2 | UINT1 | Remote function: 2 = Group Call | ||
| 3 | UINT2 | Reference to be used in messages addressed directly to initiator. | ||
| 4 | UINT1 | Global group number | ||