Difference between revisions of "VPA - Public Address Amplifiers"
From Zenitel Wiki
(New page: The VPA - Public Adress Amplifier is available in three versions: VPA-120 (120 Watt), VPA-240 (240 watt) and VPA-400 (400 watt). =Introduction=) |
|||
| Line 1: | Line 1: | ||
The VPA - Public Adress Amplifier is available in three versions: VPA-120 (120 Watt), VPA-240 (240 watt) and VPA-400 (400 watt). | The VPA - Public Adress Amplifier is available in three versions: VPA-120 (120 Watt), VPA-240 (240 watt) and VPA-400 (400 watt). | ||
| − | =Introduction= | + | ==Introduction== |
| + | |||
| + | ===About this document=== | ||
| + | This manual is intended to give relevant information on the system | ||
| + | features, available equipment, typical configurations, simplified wiring | ||
| + | and programming and technical data for the concept. | ||
| + | '''''This document is aimed at''''' | ||
| + | :* Consultans | ||
| + | :* Installers | ||
| + | :* End users | ||
| + | |||
| + | ===Equipment covered by this document=== | ||
| + | Public adress amplifiers | ||
| + | :* VPA-120 (120 W) | ||
| + | :* VPA-240 (240 W) | ||
| + | :* VPA-400 (400 W (*1)) | ||
| + | '''''Note! The amplifiers are delivered for 230 VAC as standard. For 115 VAC mains, a plug must be removed and fuses must be changed. See section 3.3.4.''''' | ||
| + | |||
| + | ===Rules and regulations=== | ||
| + | The VPA system and its components have been tested according to the | ||
| + | following regulations: | ||
| + | :* '''EN 60065: 2002''' | ||
| + | :: “Audio, video and similar electronic apparatus. Safety requirements” | ||
| + | :* '''IEC 60533: Second edition, 1999''' | ||
| + | :: "Electrical and electronic installation in ships - Electromagnetic compatibility". | ||
| + | :* '''EN 60945: Fourth edition, 2002''' | ||
| + | :: "Maritime navigation and radio communication equipment and systems - General requirements - Methods of testing and required test results". | ||
| + | :* '''IACS E10: Corr.1 July 2003''' | ||
| + | :: "Unified environmental test specifications - Testing procedure for electric control and monitoring, safety and protection, onboard computer based systems and peripherals, loading instruments, internal communication and other electrical equipment as considered appropriate". | ||
Revision as of 14:29, 28 November 2008
The VPA - Public Adress Amplifier is available in three versions: VPA-120 (120 Watt), VPA-240 (240 watt) and VPA-400 (400 watt).
Contents
Introduction
About this document
This manual is intended to give relevant information on the system features, available equipment, typical configurations, simplified wiring and programming and technical data for the concept. This document is aimed at
- Consultans
- Installers
- End users
Equipment covered by this document
Public adress amplifiers
- VPA-120 (120 W)
- VPA-240 (240 W)
- VPA-400 (400 W (*1))
Note! The amplifiers are delivered for 230 VAC as standard. For 115 VAC mains, a plug must be removed and fuses must be changed. See section 3.3.4.
Rules and regulations
The VPA system and its components have been tested according to the following regulations:
- EN 60065: 2002
- “Audio, video and similar electronic apparatus. Safety requirements”
- IEC 60533: Second edition, 1999
- "Electrical and electronic installation in ships - Electromagnetic compatibility".
- EN 60945: Fourth edition, 2002
- "Maritime navigation and radio communication equipment and systems - General requirements - Methods of testing and required test results".
- IACS E10: Corr.1 July 2003
- "Unified environmental test specifications - Testing procedure for electric control and monitoring, safety and protection, onboard computer based systems and peripherals, loading instruments, internal communication and other electrical equipment as considered appropriate".