Difference between revisions of "Linux Console"
From Zenitel Wiki
| Line 41: | Line 41: | ||
Turning AMC dipswitch S601-1 ON disables AlphaPro over IP | Turning AMC dipswitch S601-1 ON disables AlphaPro over IP | ||
| − | [[Image:Linux4.png]] | + | [[Image:Linux4.png|250px]] |
| + | |||
| + | |||
| + | |||
| + | =Some Linux commands= | ||
| + | Ping <IP-address> (Checks communication against external device)<br\> | ||
| + | ps -A (List running processes) | ||
| + | |||
| + | Documentation for Linux commands: [http://www.die.net/doc/linux/man/ die.net/doc/linux] | ||
| + | |||
| + | |||
| + | |||
| + | =Access the AMC-IP via FTP Client= | ||
| + | AlphaCom E supports FTP protocol (File Transfer Protocol). FTP client (like Windows Commander) looks and acts very much like the Windows Explorer. The FTP ports (20:21) are by default disabled in the firewall. | ||
| + | |||
| + | [[Image:Linux5.png|250px]] | ||
Revision as of 08:25, 17 July 2007
The AlphaCom E runs a [Linux] distribution from MontaVista, kernel version 2.4.<br\> Linux uses a command line interface (CLI).
When do I need to use the Linux Console?
- Ping devices on the network
- File image update
- Access to the file system
The Linux Console can be accessed on two ways:
- Via the ethernet port using ”telnet”
- Via serial port 1
Contents
Linux Console - Telnet
Start the Windows command line
Type telnet <AMC IP-adress>
Username: alpha Password: com The Telnet port (23) is by default disabled in the firewall
Linux Console – Serial Port
Use a terminal program (like HyperTerminal) connected to serial port 1<br\> Communication parameters:
- 115.200 baud
- No parity
- 8 databits
- 1 stop bit
Turning AMC dipswitch S601-1 ON disables AlphaPro over IP
Some Linux commands
Ping <IP-address> (Checks communication against external device)<br\> ps -A (List running processes)
Documentation for Linux commands: die.net/doc/linux
Access the AMC-IP via FTP Client
AlphaCom E supports FTP protocol (File Transfer Protocol). FTP client (like Windows Commander) looks and acts very much like the Windows Explorer. The FTP ports (20:21) are by default disabled in the firewall.
