Difference between revisions of "Linux Console"
From Zenitel Wiki
(→Some Linux commands) |
|||
| Line 54: | Line 54: | ||
:netstat -a (list network connections) | :netstat -a (list network connections) | ||
| − | The Linux | + | The Linux console runs the "bash" shell. |
Documentation for Linux commands: [http://www.die.net/doc/linux/man/ die.net/doc/linux] | Documentation for Linux commands: [http://www.die.net/doc/linux/man/ die.net/doc/linux] | ||
Revision as of 15:32, 9 February 2010
Contents
Linux Console
The AlphaCom E runs a [Linux] distribution from MontaVista, kernel version 2.4.<br\> Linux uses a command line interface (CLI).
When do I need to use the Linux Console?
- Ping devices on the network
- File image update
- Access to the file system
The Linux Console can be accessed on two ways:
- Via the ethernet port using ”telnet”
- Via serial port 1
Linux Console - Telnet
Start the Windows command line
Type telnet <AMC IP-adress>
Username: alpha Password: com The Telnet port (23) is by default disabled in the firewall
Linux Console – Serial Port
Use a terminal program (like HyperTerminal) connected to serial port 1<br\> Communication parameters:
- 115.200 baud
- No parity
- 8 databits
- 1 stop bit
Turning AMC dipswitch S601-1 ON disables AlphaPro over IP
Some Linux commands
- ping <IP-address> (Checks communication against external device)<br\>
- ps -A (List running processes)
- ls -l (list files)
- /sbin/ifconfig (list IP adresses etc of ethernet ports)
- netstat -a (list network connections)
The Linux console runs the "bash" shell. Documentation for Linux commands: die.net/doc/linux
The TST console debug function of the AMCD application can accessed from linux console. Tracing of SIP is also possible.
Access the AMC-IP via FTP Client
AlphaCom E supports FTP protocol (File Transfer Protocol). FTP client (like Windows Commander) looks and acts very much like the Windows Explorer. The FTP ports (20:21) are by default disabled in the firewall.
