Actions

Difference between revisions of "WK20 - 20W Power Amplifier"

From Zenitel Wiki

Line 42: Line 42:
 
== Related articles ==
 
== Related articles ==
 
[[IP Substation - Amplified calling]]
 
[[IP Substation - Amplified calling]]
[[Category:AlphaCom E System]]
+
[[Category:Hardware]]
 +
[[Category:Additional equipment]]

Revision as of 12:13, 2 December 2008

The amplifier 1000614100 is very designed to amplify the audio of a Stentofon station. The amplifier can be used standalone (speaker only), or it can be used in combination with a station to amplify the speaker signal. It can be used both with IP stations and with analog stations.

Features

  • Output for 1 amplified loudspeaker
  • Output level control

Description

The board contains a power amplifier, a potentiometer for adjusting the output volume and an input for switching the amplifier on/off. The symetrical input is matched to the output level on the subscriber board in the AlphaCom exchange.

The amplifier may be constantly on, or switched on and off by the M-key on the calling station. It is recommended that power to the amplifier board is supplied from a separate class II transformer. <br\> In the AlphaCom exchange, brackets must be mounted on the board, in order to fasten to the mounting rail.

The potensiometer "Balance" is to balance out hum and noise, and is preset from factory. Further adjustments are normally not neccessary.

Connectors and Switches

Figure 13-13: Connectors and switches on Power Amplifier

<br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\><br\>

Technical Specifications

Text Value
Item Number 1000614100
Input signal level 1 V - 10 V
Input impedance 6kOhm
Output power<br\><br\> 20 W into 4ohm<br\>12 W into 8 ohm<br\>6 W into 20 ohm
Frequency range 140 - 20.000Hz
Max. amplification 10.5 dB
Recommended room temperature<br\> 0'C to +35'C<br\>+32'F to + 95'F
Humidity Range<br\>(non-condensing): 10% - 90% RH<br\>
Dimensions W x H x D<br\> 75mm x 84 mm x 40 mm<br\>2.9" x 3.3" x 1.6"

Related articles

IP Substation - Amplified calling