Difference between revisions of "$CALL command used in AlphaNet (Event Handler)"
From Zenitel Wiki
Line 2: | Line 2: | ||
Example: | Example: | ||
− | - An external data device (PC) is connected to node 1 | + | - An external data device (PC) is connected to node 1 <br\>- Station 1234 is node 2<br\>- Station 5678 is node number 3 |
− | - Station 1234 is node 2 | ||
− | - Station 5678 is node number 3 | ||
− | $Call L1234 L5678 will set up the call betwen the stations. Requires that: | + | $Call L1234 L5678 will set up the call betwen the stations. Requires that:<br\>- 1234 is defined as global number (83/2) in node 1<br\>- 5678 is defined as global number (83/3) in node 2 |
− | - 1234 is defined as global number (83/2) in node 1 | ||
− | - 5678 is defined as global number (83/3) in node 2 | ||
− | Alternatively: | + | Alternatively:<br\>$CALL L1234 L(3)5678 will set up the call betwen the stations. Requires that: |
− | $CALL L1234 L(3)5678 will set up the call betwen the stations. Requires that: | + | <br\>- 1234 is defined as global number (83/2) in node 1 |
− | - 1234 is defined as global number (83/2) in node 1 | ||
$call %2.ref C456 | $call %2.ref C456 |
Revision as of 08:49, 9 August 2007
The $CALL command can have local station dir. no. (9/x) or a global station dir. no. (83/x) as A-subscriber parameter. If the A-subscriber is a global station dir. no. the whole message will be forwarded to that node, and executed there.<br\> This means that the B-subscriber must be defined in that node as a local or global number.
Example: - An external data device (PC) is connected to node 1 <br\>- Station 1234 is node 2<br\>- Station 5678 is node number 3
$Call L1234 L5678 will set up the call betwen the stations. Requires that:<br\>- 1234 is defined as global number (83/2) in node 1<br\>- 5678 is defined as global number (83/3) in node 2
Alternatively:<br\>$CALL L1234 L(3)5678 will set up the call betwen the stations. Requires that: <br\>- 1234 is defined as global number (83/2) in node 1
$call %2.ref C456