Difference between revisions of "Simplex conversation (Event Handler)"
From Zenitel Wiki
(→Whole Exchange in Simplex Mode) |
(→Whole Exchange in Simplex Mode) |
||
Line 5: | Line 5: | ||
=Whole Exchange in Simplex Mode= | =Whole Exchange in Simplex Mode= | ||
− | |||
This event will set the whole exchange in simplex (Press To Talk) mode (will also work in AlphaNet). | This event will set the whole exchange in simplex (Press To Talk) mode (will also work in AlphaNet). | ||
In [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event: | In [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event: | ||
+ | [[File:Simplex.PNG|thumb|left|500px|Event that sets the whole exchange in simplex mode]] | ||
+ | <br style="clear:both;" /> | ||
*Owner: [[UDP|UDP 8]] (All stations) | *Owner: [[UDP|UDP 8]] (All stations) |
Revision as of 15:19, 17 September 2013
General
This article describes how you can override the voice-operated duplex (VOX), and set the system in Simplex (Press To Talk) mode.
Software requirement: AMC 10.52 or newer.
Whole Exchange in Simplex Mode
This event will set the whole exchange in simplex (Press To Talk) mode (will also work in AlphaNet).
In AlphaPro, go to Exchange and System -> Events, press Insert and create the following event:
- Owner: UDP 8 (All stations)
- Event Type: Conversation Outgoing
- When Change To: ON
- When Related To: All
- Action: @U%2.nod $SET_SIMPLEX L%2.dir U0 U1
Initial speech direction will be from B-subscriber towards A-subscriber.
If the Simplex mode should not apply to the whole exchange, but to a single station or a limited group of stations only, simply change the owner of the event to that single station, or include the relevant stations in an UDP group and set this UDP group as event owner.