Difference between revisions of "GSM gateway (Mobile VoIP)"
From Zenitel Wiki
(New page: Default IP address is 192.168.0.100 Username: voip Password: 1234 Route: Mobile: Mobile > Settings > SIP From: Select '''User/Tel''' Mobile > Settings > Mobile PIN Code: If the mobile n...) |
|||
Line 7: | Line 7: | ||
Mobile: | Mobile: | ||
− | Mobile > Settings > SIP From: Select '''User/Tel''' | + | *Mobile > Settings > SIP From: Select '''User/Tel''' |
− | Mobile > Settings > Mobile PIN Code: If the mobile needs to be unlocked by a pin code you must choose '''Enable''', | + | *Mobile > Settings > Mobile PIN Code: If the mobile needs to be unlocked by a pin code you must choose '''Enable''', and enter the pin code, and confirm the pin code |
− | + | *Mobile > Status: Shows that the SIM card in in place, and that the Mobil VoIP unit is registered on the GSM network. | |
− | |||
− | Mobile > Status: Shows that the SIM card in in place, and that the Mobil VoIP unit is registered on the GSM | ||
− | |||
− | network. | ||
Network: | Network: | ||
− | Network > WAN Settings > IP Type = Enable "Fixed IP" | + | *Network > WAN Settings > IP Type = Enable "Fixed IP" |
− | Network > WAN Settings > IP = IP address of the Mobile VoIP unit | + | *Network > WAN Settings > IP = IP address of the Mobile VoIP unit |
− | Network > WAN Settings > Mask = Network mask | + | *Network > WAN Settings > Mask = Network mask |
− | Network > WAN Settings > Gateway = IP address of the network gateway | + | *Network > WAN Settings > Gateway = IP address of the network gateway |
SIP Settings: | SIP Settings: | ||
In SIP Settings > Service Domain, enter information for "Realm 1": | In SIP Settings > Service Domain, enter information for "Realm 1": | ||
− | SIP Settings > Service Domain > Active = ON | + | *SIP Settings > Service Domain > Active = ON |
− | SIP Settings > Service Domain > Display Name = Any text | + | *SIP Settings > Service Domain > Display Name = Any text |
− | SIP Settings > Service Domain > User Name = Access number to the gateway | + | *SIP Settings > Service Domain > User Name = Access number to the gateway |
− | SIP Settings > Service Domain > Register Name = Access number to the gateway | + | *SIP Settings > Service Domain > Register Name = Access number to the gateway |
− | SIP Settings > Service Domain > Domain Server = IP address of the AlphaCom | + | *SIP Settings > Service Domain > Domain Server = IP address of the AlphaCom |
− | SIP Settings > Service Domain > Proxy Server = IP address of the AlphaCom | + | *SIP Settings > Service Domain > Proxy Server = IP address of the AlphaCom |
Status = Registered: The gateway is registered at the AlphaCom. | Status = Registered: The gateway is registered at the AlphaCom. | ||
− | SIP Settings > DTMF Setting: Enable "Send DTMF SIP Info" | + | *SIP Settings > DTMF Setting: Enable "Send DTMF SIP Info" |
Limitations: | Limitations: | ||
− | + | Outgoing calls from AlphaCom: | |
+ | * No DTMF tones sent from AlphaCom to line during conversation (Nettbank kan ikke brukes). | ||
+ | * Digits during conversation (e.g. door opening, M-key) not possible from the phone |
Revision as of 16:44, 29 February 2008
Default IP address is 192.168.0.100
Username: voip Password: 1234
Route:
Mobile:
- Mobile > Settings > SIP From: Select User/Tel
- Mobile > Settings > Mobile PIN Code: If the mobile needs to be unlocked by a pin code you must choose Enable, and enter the pin code, and confirm the pin code
- Mobile > Status: Shows that the SIM card in in place, and that the Mobil VoIP unit is registered on the GSM network.
Network:
- Network > WAN Settings > IP Type = Enable "Fixed IP"
- Network > WAN Settings > IP = IP address of the Mobile VoIP unit
- Network > WAN Settings > Mask = Network mask
- Network > WAN Settings > Gateway = IP address of the network gateway
SIP Settings:
In SIP Settings > Service Domain, enter information for "Realm 1":
- SIP Settings > Service Domain > Active = ON
- SIP Settings > Service Domain > Display Name = Any text
- SIP Settings > Service Domain > User Name = Access number to the gateway
- SIP Settings > Service Domain > Register Name = Access number to the gateway
- SIP Settings > Service Domain > Domain Server = IP address of the AlphaCom
- SIP Settings > Service Domain > Proxy Server = IP address of the AlphaCom
Status = Registered: The gateway is registered at the AlphaCom.
- SIP Settings > DTMF Setting: Enable "Send DTMF SIP Info"
Limitations:
Outgoing calls from AlphaCom:
- No DTMF tones sent from AlphaCom to line during conversation (Nettbank kan ikke brukes).
- Digits during conversation (e.g. door opening, M-key) not possible from the phone