Difference between revisions of "CDC STATE"
From Zenitel Wiki
| Line 21: | Line 21: | ||
4 ACTIVE, call is still active, will come every 10 second during connection<br> | 4 ACTIVE, call is still active, will come every 10 second during connection<br> | ||
5 DISCONNECT, CDC sequence ended, ABSD to release call.<br> | 5 DISCONNECT, CDC sequence ended, ABSD to release call.<br> | ||
| − | 6 SPEECH_START, Speech detected by AudioCodes | + | 6 SPEECH_START, [[ABSD_Billing#AudioCodes_X-detect|Speech detected by AudioCodes]]<br> |
| − | 7 SPEECH_END, Speech detect end by AudioCodes | + | 7 SPEECH_END, Speech detect end by AudioCodes |
|- | |- | ||
|align=center|4||[[NET_OBJ_REF]]||colspan="3"|Netref related to state type, (Feature, B-station or digit) | |align=center|4||[[NET_OBJ_REF]]||colspan="3"|Netref related to state type, (Feature, B-station or digit) | ||
Revision as of 14:04, 5 February 2009
Related to ABSD_Billing
| CDC_STATE | 0x009E | 158 | AMC 10.40 | |
|---|---|---|---|---|
| Message used for billing control, from AMCD to ABSD <br\>
CDC = Call Detail Control. Response is CDC_CMD. | ||||
| 1 | UINT2 | Connection Reference for this "dialing" sequence (actually ST_IND of A-station) | ||
| 2 | NET_OBJ_REF | A-station (billed station), in NRF_LOCAL_DIRNO format. | ||
| 3 | UINT1 | State of billing sequence. 1 START, user has initiated a feature requiring CDC (5 = feature dirno) | ||
| 4 | NET_OBJ_REF | Netref related to state type, (Feature, B-station or digit) | ||