PA CMD
From Zenitel Wiki
PA_CMD | 0x00AE | 174 | AMC 11.02 | |
---|---|---|---|---|
Set state on a PA interface (IP-ARIO) | ||||
1 | NET_OBJ_REF <BR\> {ECL_STATION} | IP-ARIO unit. | ||
2 | UINT1 | Command 1 = Acknowledge fault, 2 = Clear fault |
PA_CMD | 0x00AE | 174 | AMC 11.02 | |
---|---|---|---|---|
Set state on a PA interface (IP-ARIO) | ||||
1 | NET_OBJ_REF <BR\> {ECL_STATION} | IP-ARIO unit. | ||
2 | UINT1 | Command 1 = Acknowledge fault, 2 = Clear fault |