Tone Test (SIP)

On an IP Station in SIP mode, select SIP Configuration > SIP Settings to access the page for configuring the SIP Account Settings.

Turbine Stations

Tone Test configuration - Turbine station

INCA Stations

Tone Test configuration - INCA station

• Enable tone test: This parameter decides whether the tone test is enabled or disabled.
• Automatically set minimum sound pressure level: By enabling this feature the station tries to calculate the parameter 'Minimum sound pressure level'. This feature should only be turned on after the station is mounted in a wall (or elsewhere) and must be redone if the station is moved. The microphone and speaker must be working correctly for an accurate result
• Tone volume: This parameter decides how loud the tone will be played out on the speaker.
• Time between tone tests: This parameter decides how often the tone test should be repeated.
• Minimum sound pressure level: This parameter decides the minimum sound pressure level before the station reports that the tone test failed. Lower this parameter if the tone test fails when it should be working.