Address Book

This article shows how to configure the Address Book in the Turbine station models TCIS-6, TCIV-6 and TFIE-6. The Address book is used to preload the station with a set of entries that you can select using the Scroll buttons on the station.

• In AlphaCom mode, select Advanced AlphaCom > Address Book, or
• In SIP or Pulse mode, select SIP Configuration > Address Book

Address Book configuration - web interface in software 4.9

Address Book upload and maintenance

The Address book can be maintained in several ways:

1. Fill in the Address Book directly via the station web interface (up to 50 entries), or
2. Upload and download Address Book from the VS-IMT tool, or
3. Upload the Address Book as a .csv file with number;text entries for call destinations (up to 5kB file size). When new address book file is uploaded the existing entries will be deleted.

The web interface

• Default Display Text: The idle text shown in the display may be changed. The default text is: Scroll to Select
• Font Size: The font size can be either 12 or 16
• OLED Brightness: Brightness: Default, Bright, Extra Bright
• Start Scrolling After: Set the time in minutes after which horizontal scrolling of the display text should start.
• Download Address Book: Link to current AddressBook.csv file which is used on the station. This link will not be visible if address book is empty.

Address Book entries

The following Address book entry formats are valid:

• Directory number. Example: 101, 231, etc
• SIP URI scheme - user@hostname, user@ipaddress. Example: 201@building1.telecom.com, 301@10.5.101.123
• Ring list entries. Example: @ringlist1, @ringlist2, @ringlist3

Upload .csv file

• Upload Address Book: A textfile with the extension .CSV consisting of directory numbers and display text with the semi-colon character (;) as delimiter may be uploaded. The CSV file can contain approx. 250 names, depending on the length of each name. The CSV file can be 5 kB at maximum.
• Click Browse... to upload a CSV file

Using Notepad to create a Addressbook file

Default call destination

The Call Button of the TCIS-6 and the TCIV-6 will call a default number when pressed without having scolled in the address book first. DAK-1 call destination will be used to make outgoing call in such scenario.

Release notes: Ver. 3.0 and 4.2: Address book must be uploaded as .csv file or via IMT tool Ver. 4.7: Address Book entires can be entered directly in the web interface Ver. 4.9: Sorting of Address Book added