ITS-1 Restore Factory Defaults

This article describes how to restore factory defaults of the ITS-1 station.

Do not perform factory reset if the phone is using constraint mode and if the admin password is lost

Restoring the Factory Default Settings will delete all configuration information on the phone. Please backup or print all the settings before you restore to the factory default settings.

Restore to Factory Default via LCD Menu

• Select the Settings icon on the screen, and scroll down to the Advanced section. Select System security > Factory reset

Restore to Factory Default via the Web interface

1. Login to ITS-1 Web GUI and go to Maintenance > Upgrade page
2. Under the Advanced Settings tab, select Factory Reset.
3. A dialog box will pop up to confirm factory reset, click OK to restore the phone to factory settings.

Factory Reset

Factory default values

• Station IP address: DHCP
• Username: admin
• Password: alphaadmin

The very first time you log in via the web interface you are prompted to change the password.

Make sure to make a note of the new password!

Enter new password