Open / Private selection feature

Feature:	Programmable Open/Private
Default directory number:	7886, 7887
Feature number:	80
Parameter 1:	0 = Open (7886) 1 = Private (7887)
Description:	Feature codes for setting the station in Open or Private mode. To use these codes, the station must first be enabled for this feature in AlphaPro, Users & Stations -> Station Type -> Programmable Open/Private. Additional information: By default the Open/Private status is decided by the station hardware by means of a Open/Private switch on the station. Alternative to mechanical PRIVATE switch.

Procedure: Dial 7886. If the feature is allowed, a success tone is heard, else a failure tone. The setting is permanent (stored in NVRAM, survives reset). Configuration: There is a flag in AlphaPro that decide if this station's OPEN/PRIVATE status is controlled by feature codes OR by station hardware. (User/More../Programmable Open/Private). Application: • Fixed functionality often required, where the station must ignore the PRIVATE switch. • EMC problems with PRIVATE switch in wall stations. Now solved by removing the switch, and use keypad for PRIVATE mode. Version: AMC 06.00 DirNo: 7886 Feature: 80/0 (Db ref. 587) 3.1.7. Feature idle: Set station PRIVATE Alternative way to select call mode PRIVATE. Procedure: Dial 7887. If the feature is allowed, a success tone is heard, else a failure tone. The setting is permanent (stored in NVRAM, survives reset).

 (User/More../Programmable Open/Private).

Application: • Fixed functionality often required, where the station must ignore the PRIVATE switch. • EMC problems with PRIVATE switch in wall stations. Now solved by removing the switch, and use keypad for PRIVATE mode.

80 FEAT_OPEN_PRIVATE

Param1	Description
??	Toggle functional OPEN/PRIVATE on station
Alternative to mechanical PRIVATE switch. Mode 0 = OPEN. Mode 1 = PRIVATE (must be enabled per station).

Back to feature list