Call restriction from guard station to cell station (Event Handler)
From Zenitel Wiki
Calls from the guard station to the cell stations should be rejected unless the cell has made a Call Request to the guard.
Use the event type “Call Requester Mode” on the cell stations to set / reset call forwarding to a dummy (non-existing) subscriber.
- The text of the dummy subscriber could be ‘Rejected’.
- Number of rings on call forwarding should be set to 0 (Exchange & System | System | More | Call Forwarding – Ring Count).
- Feature Reminder (blink’n bleep) should be disabled for the cells
Set transfer to dummy number 345 when not in Call Requester Mode:
Event Owner: | Stations w/UDP Id: 2 (All cell stations) |
Event type: | 11 – Call Requester Mode |
When change to: | OFF |
When related to: | All |
Action: | $TRF L%1.dir “I345” |
Reset transfer when in Call Requester Mode:
Event Owner: | Stations w/UDP Id: 2 (All cell stations) |
Event type: | 11 – Call Requester Mode |
When change to: | ON |
When related to: | All |
Action: | $TRF L%1.dir “” |