Broadcast messages (ACDP)
From Zenitel Wiki
This article shows some examples of the ACDP broadcast messages transmitted from the AlphaCom.
| Message | Short name | Message no, Hex | Description |
|---|---|---|---|
| ST_BUSY_BC | 0x0036 | Broadcast message: Intercom station is busy | |
| ST_FREE_BC | 0x0037 | Broadcast message: Intercom station is free | |
| CALL_STATUS_BC | 0x0040 | Broadcast message telling the status of a call | |
| CONN_STATUS_BC | 0x0041 | Broadcast message telling that a connection is established | |
| DISCON_STATUS_BC | 0x0042 | Broadcast message telling that a connection is disconnected | |
| EXT_FEATURE_BC | 0x0043 | Broadcast message when a directory number (feature 50) is dialed on a station | |
| Q_ELEM_ADDED | 0x004B | Broadcast message. Reports that a mail message has been added to a station’s mail queue | |
| Q_ELEM_REMOVED | 0x004C | Broadcast message. Reports that a mail message has been removed from a station’s mail queue | |
| CONF_IS_ROOT | 0x007B | Broadcast message. Sender informs that it is root of conference | |
| CONF_NOT_ROOT | 0x007C | Broadcast message. Sender informs that it is no longer root of conference |
The messages below are broadcast messages transmitted from the AlphaCom on the AlphaCom Data Protocol when a call is initiated by the command: $CALL L8002 L8009
- 014101FF2118410015003632018002=54
- 014101FF2119410016003632018009=5D
- 014101FF211A410017004007D706070B1A2D32018002320180090201=76
- 014101FF211B410018004107D706070B1A2D01043201800232018009=7F
Message explanation
Space is added for better readability.
Message 014101FF2118410015003632018002=54 0141 01FF 21 18 41 0015 0036 32018002 = 54 ---- ---- -- -- -- ---- ---- -------- - -- ! ! ! ! ! ! ! ! ! +- Checksum ! ! ! ! ! ! ! ! +--- Checksum next ! ! ! ! ! ! ! +-------- Station in NET_OBJ_REF format: dir no 8002, node 01 ! ! ! ! ! ! +---------------- Message id: 0x0036 = Station is busy ! ! ! ! ! +--------------------- Reference: Value identifying receivers’ reference ! ! ! ! +------------------------- Message class: 65 (0x41) ‘A’ = AlphaCom ! ! ! +---------------------------- Options: The number of bytes is given by <hopcountbyte> ! ! +------------------------------- Hopcount byte ! +----------------------------------- Destination: Node 01, broadcast (0xFF) +---------------------------------------- Source: Node 01, module 65 (0x41)