Actions

Automatic M-key In Group Call

From Zenitel Wiki

Revision as of 10:31, 9 May 2008 by Asle (talk) (Configuration from Event Handler)

Description

A Group Call can be configured to start audio without the need of pressing the M-key. The parameter to change is not available from AlphaPro, so it has to be changed in the AMC memory (nvram) directly, either via the TST console or by using the Event Handler.

TST>>nvram - ex_profile.group[1].flags = 1 (0x01)

Flags:<br\> 0 = Regular group call behaviour. <br\> 1 = Will turn the Automatic M-key on for all stations initiating group call. <br\> 2 = Will turn it on only for SIP stations initiating group call. <br\>

Configuration from Event Handler

Enable automatic M-key for group 3 (86) when called from SIP

(Use System Status Event related to device 65 )

$SNV Q(flag) W1 W11 W(group number) W6


flag = 0 (off) 1 or 2 as described above.<br\> group number = 1 - 100

Automatic M-key is meant to be used on SIP or special non display stations. 
Automatic M-key will on AlphaCom display stations show "wait" in second line of the display.

Back to Feature description