HowTo Setup AlphaCom NetworkDisk
From Zenitel Wiki
The following services is supported on NetworkDisk:
- Extended Aphache/PHP/Mysql support
- Mysql Database storage
- Log storage
Contents
The only requirement for the sharing device is that is supports the SAMBA/CIFS protocol, and it has sufficient disk space.
On the sharing device tree separate shares needs to be setup:
| Share Name | Description |
|---|---|
| local | The AlphaCom Extended Application packages. Mounted locally on /usr/local/ |
| mysql | Storage space for the AlphaCom MySQL databases. Mounted locally on /var/mysql/ |
| log | Storage space for AlphaCom system log. Mouned locally on /var/log/ |
Default:
user = ace passswd = alphacom
If other user/passwd is to be used the mounting scripts described below needs to be updated.
Required tools for setting up AlphaCom NetworkDisk
The setup procedure requires some manual steps using a ssh terminal and sftp file transfer.
Recommended tools to use:
SSH terminal: PuTTY (http://www.chiark.greenend.org.uk/~sgtatham/putty/) sftp client: WinSCP (http://winscp.net/eng/index.php)
Netdisk Configuration file
The IP address for the sharing device and share user information is stored in simple confoguration file (shell variables):
/opt/amc/config/netdiskconfig.sh
Open a SSH terminal to the AlphaCom target and su to root (use "su -"):
-bash-3.1$ su -
Password: {root password}
The script /opt/amc/scripts/netdiskprepare.sh is used to prepare the mount partitions for AlphaCom Extended Application support.
First the the disks has to be mounted on the AlphaCom, command and typical output:
-bash-3.1# ./netdiskprepare.sh mount
------------------- START -------------------------------
Trying to mount netdisk shares
Disk sucsessfully mounted on /mnt/local
Disk sucsessfully mounted on /mnt/log
Disk sucsessfully mounted on /mnt/mysql
---------------------------------------------------------
Free space on shares:
Filesystem Size Used Avail Use% Mounted on
//10.5.2.165/alphalog
465G 178M 465G 1% /mnt/log
//10.5.2.165/alphalocal
465G 178M 465G 1% /mnt/local
//10.5.2.165/alphadb 465G 178M 465G 1% /mnt/mysql
---------------------------------------------------------
Used Space on shares:
AlphaCom Extended Applications : 0 /mnt/local
AlphaCom MySQL Database : 0 /mnt/mysql
AlphaCom NetDisk logging : 0 /mnt/log
---------------------------------------------------------
Testing for a valid Extended Application share
!! No AlphaCom Extended Applications found !!
Use sftp to transfer and install a new packages to this mount
Testing for a valid alphacom MySQL DB (simple test)
!! No AlphaCom MySQL DB folder found !!
Use this script with option 'initdb' to create and initialiaze an empty DB
------------------- END ---------------------------------
The scripts give two warnings saying that no Extended Application package installed, and no MySQL database found. Continue with paragraphs below until you can mount without the warnings. You can use the script to unmount the shares (and mount again for testing). Tip: Use the linux mount command to get a list of the active mounts in the system.
-bash-3.1# ./netdiskprepare.sh umount
Installing AlphaCom Extended Application Package
Make sure the /mnt/local/ folder is empty. If necessary clean the folder. Be sure to be in right folder before issuing the command
-bash-3.1# rm -Rf
Use a sftp client to transfer the package (alpha_extended_apps_xx.tbz2) to the folder /mnt/local.
-bash-3.1# tar xjf alpha_extended_apps_xx.tbz2