Mooring Conference
From Zenitel Wiki
Requirements:
- Everybody shall hear the Active User
- When a user presses the M-key he will become the Active User. Active User doesn't have to keep the M-key pressed while talking
- The Bridge shall be able to talk into the conference by pressing the M-key. When the M-key is released the Active User shall continue to talk without pressing the M-key
- When next user presses M-key, he shal become the Active User
- The Bridge shall from the DAK panel be able to select who should be the Active User
- The DAK panel shall indicate on LED's who is participating in the conference, and who is Active User.
- The Bridge shall be able to disconnect the confrence by pressing a DAK key
- Each user shall be able to disconnect from the conference by dialing a code, e.g. 8200
- It shall be possible to integrate a mobile radio system. The radio shall be able to talk into the conference when squelsh signal is present
- Include all conference participants, except the Bridge and the Radio I/F FBSAR (if radio is connected) in UDP group 1
- Include the Bridge (and Radio I/F if connected) in UDP group 2
- Include all conference participants, including the Bridge and the Radio I/F FBSAR, in group 9
- Include the Bridge (and Radio I/F if connected) in group 10
- In order to override the active user, all users (incl. Bridge and Radio I/F) must have the "SX Conf Override" flag enabled (Users & Stations > User Preferences).
In AlphaPro, Exchange & System -> Events, insert a new event with the following parameters:
The conference is started by dialing event trigger 9533 from the Bridge. UDD 500, which contains the current Active User, is cleared:
Event Owner: | The Bridge station |
Event type: | 15 - Event Trigger |
Subevent: | 0 |
When change to: | ON |
When related to: | Directory number: 9533 |
Action: | WUDD 500 0 CNG 9 1 |
The conference is stopped by dialing event trigger 9534 from the Bridge:
Event Owner: | The Bridge station |
Event type: | 15 - Event Trigger |
Subevent: | 0 |
When change to: | ON |
When related to: | Directory number: 9534 |
Action: | CNG 9 0 |
When a user releases the M-key, the station will still be feeding the conference:
Event Owner: | UDP Group 1 (Active users) |
Event type: | 31 - M-key |
Subevent: | 255 |
When change to: | OFF |
When related to: | All |
Action: | pause $CONF_TALK L%1.dir |
When the Bridge releases the M-key, the Active User will be talking into the conference. A 1.0 sec timer is used to retrigger the Active Talker in case the Bridge (or radio) presses M-key briefly:
Event Owner: | UDP Group 2 (Bridge and Radio) |
Event type: | 31 - M-key |
Subevent: | 255 |
When change to: | OFF |
When related to: | All |
Action: | $CONF_TALK L%udd(500) $ST L%1.dir W10 L99 |
The 1.0 sec timer retriggers the Active Talker in case the Bridge (or radio) pressed the M-key briefly:
Event Owner: | UDP Group 2 (Bridge and Radio) |
Event type: | 21 - Event Timeout |
Subevent: | 0 |
When change to: | ON |
When related to: | Directory number: 99 |
Action: | $CONF_TALK L%udd(500) |
The 1.0 sec timer retriggers the Active Talker in case the Bridge (or radio) pressed the M-key briefly:
Event Owner: | UDP Group 8 (All stations) |
Event type: | Conversation Outgoing |
Subevent: | 0 |
When change to: | ON |
When related to: | Directory number: 8201 |
Action: | OWN r 138 IND %2.phy %2.dak(I%udd(501)) 2 3 OFF |
- A user talks into the conference by pressing the M-key. When the M-key is released, the users in UDP 1 shall remain the active talker. This event will force the user to feed the conference when M is released, and the directory number of the active user is stored in UDD 500.