IP DualDisplay Connections
From Zenitel Wiki
Introduction
The table below is an overview of the main connectors involved when installing the STENTOFON IP Stations.
| LAN | 10/100 Mbps RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line. |
Power Supply
The IP Station supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line.
Network Connection
There are two RJ45 ports on the IP Stations (except IP Dual Display):
- LAN port: for connecting to the network and the AlphaCom XE Audio Server.
- AUX port: for connecting to auxiliary equipment such as a PC or IP Camera.
There is one RJ45 port located at the bottom of the IP Dual Display station that is used as the LAN port.
