Call and Relay operation by URL
From Zenitel Wiki
It is possible to operate the relay on a station by an URL.
In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station.
Deactivate the relay:
http://10.5.2.138/goform/zForm_webcall?deactivate=Deactivate
Activate the relay:
http://10.5.2.138/goform/zForm_webcall?activate=Activate
Activate the relay with a timer (here 1 second):
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=1
Activate the relay with a timer (here 20 seconds):
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=20