Actions

Press and Hold Time (Zenitel Connect Pro)

From Zenitel Wiki

Revision as of 14:51, 13 February 2026 by Asle (talk | contribs) (Created page with "Defines the number of seconds a DAK key/Input must be pressed and held before the call is established. The minimum delay is 0 seconds (default), and the maximum delay is 60 seconds. Configured from the “Call Setting” section. Press and Hold Time is used to support the following use cases: Lift call Category: Zenitel Connect Pro Category: Zenitel Connect Pro Features and Functions")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Defines the number of seconds a DAK key/Input must be pressed and held before the call is established.

The minimum delay is 0 seconds (default), and the maximum delay is 60 seconds.

Configured from the “Call Setting” section.

Press and Hold Time is used to support the following use cases:

Lift call

Retrieved from "https://wiki.zenitel.com/w/index.php?title=Press_and_Hold_Time_(Zenitel_Connect_Pro)&oldid=242592"