SCAN RCI ONCE

SCAN_RCI_ONCE		0x0020	32	AMC 05.00
$SCAN W1 U3 U5
Scan input until defined condition is met, then report to exchange.
1	UINT2	Input pin number
2	UINT1	Scan mode: <br\>0 = Stop scan <br\>1 = Report when input is off <br\>2 = Report when input is on <br\>3 = Report when input changes (both on and off)
3	UINT1	Stabilization time. Unit = 10ms.
Response:		SCAN_RCI_ACK

Back to AlphaNet message list