Explanation of message format
From Zenitel Wiki
Explanation of table format, explanations are in italic font:
Message name<br\>CONN_REQUEST | Value, Hex<br\>0x000A | Value, dec.<br\>10 | sw version<br\>AMC 05.00 | |
---|---|---|---|---|
Example of a complete message in Simple Link Layer format (commands TO exchange)<br\>$CONN L101 L102 | ||||
Textual description of the message
Set up an conversation between users. Priority setup: Open call only, no campon busy. | ||||
1 | Parameter format<br\>NET_OBJ_REF<br\>{ECL_USER} | Parameter description<br\>
The calling (A) user. The user must have an associated station. | ||
4 | UINT1<BR\>(optional) | Call Priority against B station:<br\>
Not specified: same priority as specified for A-station. |
AMC 07.30 | |
If response required:<br\>Response: | Expected response message<br\>CONN_REFERENCE |