Mooring Conference
From Zenitel Wiki
Requirements:
- Everybody shall hear the Active User
- When a user presses the M-key he will become the Active User. Active User doesn't have to keep the M-key pressed while talking
- The Bridge shall be able to talk into the conference by pressing the M-key. When the M-key is released the Active User shall continue to talk without pressing the M-key
- When next user presses M-key, he shal become the Active User
- The Bridge shall from the DAK panel be able to select who should be the Active User
- The DAK panel shall indicate on LED's who is participating in the conference, and who is Active User.
- The Bridge shall be able to disconnect the confrence by pressing a DAK key
- Each user shall be able to disconnect from the conference by dialing a code, e.g. 8200
- It shall be possible to integrate a mobile radio system. The radio shall be able to talk into the conference when squelsh signal is present
- Include all conference participants, except the Bridge and the Radio I/F FBSAR (if radio is connected), in UDP group 1
- Include the Bridge (and Radio I/F if connected) in UDP group 2
- In order to override the active user, all users (incl. Bridge and Radio I/F) must have the "SX Conf Override" flag enabled (Users & Stations > User Preferences).
In AlphaPro, Exchange & System -> Events, insert a new event with the following parameters:
E
Event Owner: | The Bridge station |
Event type: | 15 - Event Trigger |
Subevent: | 0 |
When change to: | ON |
When related to: | Directory number: 9533 |
Action: | WUDD 500 0 CNG 9 1 |
- A user talks into the conference by pressing the M-key. When the M-key is released, the users in UDP 1 shall remain the active talker. This event will force the user to feed the conference when M is released, and the directory number of the active user is stored in UDD 500.