Search results
Create the page "VS-Client Pulse" on this wiki! See also the search results found.
- ==Can an existing Pulse System be upgraded to an IC-EDGE System?== Yes, it is possible to upgrade your existing Pulse System to an IC Edge System.13 KB (2,186 words) - 15:15, 29 August 2023
- * Audio Messaging services are supported when the station operates in SIP, Pulse or Edge mode. Example 2: Distribution of alarm message via [[Group Call (Pulse)|Group Call]]. When a DAK key or an Input of a Turbine device is activated,13 KB (2,116 words) - 15:25, 6 August 2020
- * VS-Client * VS-Client softclients12 KB (1,878 words) - 16:12, 15 August 2022
- ...orkaround is that (1) data.lua file is deleted from all stations including Pulse server - this will reboot stations, and (2) after reboot go to Server confi9 KB (1,458 words) - 13:54, 24 May 2023
- [[Category: Pulse - Configuration]]4 KB (661 words) - 17:10, 24 March 2021
- * Audio Messaging services are supported when the station operates in SIP, Pulse or Edge mode.14 KB (2,234 words) - 12:21, 24 October 2023
- [[File:Pulse-GroupCall-sip-phones.JPG|none|thumb|728x728px]]11 KB (1,796 words) - 11:27, 24 October 2023
- ...s station to cause a Remote Control Output related to the other station to pulse for 5 sec., typically opening a door. (Actually any action is possible. e.g ...ds the corresponding OFF event after 5 seconds. A PC must either rely on a pulse-trigged door lock motor, or have an internal timer corresponding to the exc18 KB (3,048 words) - 07:15, 30 March 2022
- ...:category:Public Address - Network amplifiers|ENA amplifiers]] in Edge/SIP/Pulse or Exigo (configurable through EMT) mode. When RCI is triggered, the device Availability dependent on device mode (ICX/AlphaCom, Edge, SIP, Pulse...) and device type and model33 KB (3,613 words) - 13:41, 12 January 2024
- ...oard type is set to TCIS 1/2/3 and TCIV 1/2/3, and the station operates in Pulse or SIP mode.9 KB (1,403 words) - 23:27, 22 May 2024
- ...eased to approximately 10 mA (20 mA). A speed-up circuit will give a short pulse with higher current so that the detection of the M-key in the exchange is f9 KB (1,486 words) - 14:14, 1 November 2016
- ...ON while the DAK key is pressed, and M-key OFF when released, but a short pulse when pressed. Examples: ...02''' will call number 102 when the station is in idle, and generate M-key pulse when the station is ringing. Can be used on call button on a substation if46 KB (7,340 words) - 17:22, 19 February 2024
- ===Pulse RCO:=== Support for generating a pulse of specified length on a “logical” RCO. <br />55 KB (8,447 words) - 05:42, 8 March 2022
- Added the text "(0.3 sec pulse)" to the help text.70 KB (11,326 words) - 10:40, 30 June 2022
- * PDEN – Pulse Density Violation Detected45 KB (7,196 words) - 13:39, 14 June 2018