Actions

1-1a. Exchange startup (solution)

From Zenitel Wiki

Revision as of 23:20, 26 February 2011 by Roarl (talk) (→‎Cards:)
EX1-1a.PNG


Practice 1-1a:

Cards:

  • Insert the ASLT card in position 1.
  • Insert the AMC-IP card in position 7.

Power:

  • Connect the power source to the plug on the back of the exchange, marked 24 VAC IN
  • Connect the mains cable to the wall outlet
  • Observe the exchange starting

Coldstart:

  • Press and hold the coldstart button on the AMC-IP board
  • Press the reset button on the power card briefly
  • Keep the cold start button pressed at least 2 sec. after reset.
  • The AMC status LED will blink green when the boot is ready.

Related articles

Retrieved from "https://wiki.zenitel.com/w/index.php?title=1-1a._Exchange_startup_(solution)&oldid=106147"