STATION EVENT BLOCK
From Zenitel Wiki
| STATION_EVENT_BLOCK | 0x00B1 | 177 | AMC 11.2.3.3 | |
|---|---|---|---|---|
| $SEB L101 U1 U1<br\> | Block M key from IP station <br\> | |||
| $SEB allow blocking of events from IP station (no analog stations) with $DP message. <br\>
Note 1: Block state will always be cleared after reset. <br\> Note 2: Only station events kicked by DIP protocoll are blocked. Events from SimpleLinkLayer ($M, $MREL e.g) are not blocked during active blocking. <br\> Note 3: $DIAL_DAK is actually (AMC 11.2.3.3) using the DIP function to simulate DAK pressing. Based on this $DIAL_DAK is blocked also at SimpleLinkLayer <br\> | ||||
| 1 | NET_OBJ_REF<br\>{ECL_USER} | Station to block | ||
| 2 | UINT1 | Block event <br\>
1 = Block M-key from IP station <br\> 2 = Block Handset state from IP station <br\> 3 = Block Digit keys from IP station <br\> 4 = Block DAK keys from IP station <br\> 5 = Block C-key from IP station <br\> | ||
| 3 | UINT1 | Block state <br\>
0 = Don't block event <br\> 1 = Block event <br\> | ||
| Response | none | |||