Turbine Test and Demo Application

The Turbine Demo Application

The Turbine Demo application and messaging package allows Turbine Compact IP Stations to work in demo mode. In demo mode you can play special .wav audio files directly from the IP stations without any connections to a server.

Installations of demo software

To install demo software for your Turbine, the following steps must be taken:

Open up SSH and TCP port inTurbine IP stastion for demo application
Load media files onto Turbine IP station
Install demo application on your PC
Close SSH port

Open SSH and TCP port in Turbine IP station for demo application

Logon to the web interface of the Turbine IP station
Set the station in SIP Mode
Check the firewall settings in Advanced Network.
Open up SSH port
Enable the Demo application port 55010

Load media files onto Turbine IP station

On the Downloads page you will find a turbine-media-demo_3.0.1.3-2_armel.ipk with wav files to be uploaded and installed in each Turbine station.

Copy this package to /tmp on the Turbine station using for example WinSCP. The protocol is SCP. Tool: http://winscp.net/eng/index.php
Login to the Turbine consol with protocol SSH. Tool: http://www.chiark.greenend.org.uk/~sgtatham/putty/
Username/password: root/root and do following to install package:

# cd /tmp
# ipkg install turbine-media-demo_3.0.1.3-2_armel.ipk

Install demo application on your PC

Download the TurbineCommandClient.zip from the Downloads page. Extract the .zip file and copy the software to a suited folder on your PC. No install needed, simply start the exe-file.
In the application, double-click inside the picture of the station to set IP address of the station
Press Connect to Mr. Turbine and red color should become green to show that you have a connection to the Turbine Station.
You might have to reset the PC first time after installation to make it work.

Close SSH port

Logon to the web interface of the Turbine IP station
Check the firewall settings in ”Advanced Network”.
Open up SSH port