TCIS Indication LEDs
From Zenitel Wiki
Revision as of 15:27, 9 October 2012 by Roarl (talk) (Created page with "=LEDs on Front Plate= thumb|700px '''<u>Status LEDs</u>''' :- '''Bell icon''' lights '''yellow''' when a call is placed and ringing :- '''Talk ico...")
LEDs on Front Plate
Status LEDs
- - Bell icon lights yellow when a call is placed and ringing
- - Talk icon lights green when a call is active and in conversation
- - Door icon lights red when the door is unlocked or relay is active
Talk Icon: Flashing at 1 second intervals
- - Station has no connection to the AlphaCom server/exchange.
- Possible reasons:
- - No connection to Ethernet
- - Wrong AlphaCom XE IP address configured
- - Invalid IP address
- - No gateway or wrong gateway to the AlphaCom server/exchange
Talk Icon: Flashing at 5 second intervals
- - Station connected but NOT registered in the AlphaCom server/exchange.
- Reason:
- - Station has not been programmed in AlphaPro
Status LEDs on PCB
Flashing 2 red + 1 green
- - Station has no connection to the AlphaCom server/exchange.
Flashing 1 red + 2 green
- - Station connected but NOT registered in the AlphaCom server/exchange.
Flashing 3 green
- - Station connected and registered in the AlphaCom server/exchange.
Ethernet Activity & Speed LEDs on PCB
Green LED
- - Steady light: Ethernet connection OK
- - Flashing: Ethernet data traffic
- - No light: No Ethernet connection
Yellow LED
- - Steady light: 100 Mbit Ethernet connection
- - No light: 10 Mbit Ethernet connection