Solution
Call buttons:
- Pressing the call button at the Entrance or in the Elevator should generate a call in private ringing mode to the Main Guard.
Program DAK 1 of the Elevator station to "I 400"
Program DAK 1 of the Entrance station to "I 400"
]]
By setting Call Priority Setup = Low, the call from the Elevator will be forced to Private ringing mode, regardless of the Open/Private status of the Main Guard
By setting Call Priority Setup = Low, the call from the Entrance will be forced to Private ringing mode, regardless of the Open/Private status of the Main Guard
Relay control. Alternative 1:
- A relay output to the CCTV system should be activated when the private ringing starts. There is one relay for each substation. Use the outputs 5 and 6.
- The relay should stay activate until the call is accepted and the conversation is cancelled. (If the call is not answered, the relay must drop when the ringing times out).
Program DAK 1 of the Elevator station to "I 400"
Program DAK 1 of the Entrance station to "I 400"
]]
By setting Call Priority Setup = Low, the call from the Elevator will be forced to Private ringing mode, regardless of the Open/Private status of the Main Guard
By setting Call Priority Setup = Low, the call from the Entrance will be forced to Private ringing mode, regardless of the Open/Private status of the Main Guard
Related articles